METAL-CERAMIC HEATERS

The complete set of each UDEN-S heater consists of fasteners and a technical passport. The complete set is standard without cord and plug, and the complete set is a station wagon with a cord and plug. Legs for installing the heater while standing on the floor should be ordered additionally.

There are no boilers, pipes or liquids in this heating system. It does not require ventilation ducts, maintenance or preparation of expensive technical permits. The installation of UDEN-S saves your home as much as possible, does not require gas welding and serious repair costs. In addition, radiant heat has a completely different nature and copes with the task of heating any room much more successfully than gas heating.

It is impossible not to consider the financial aspect of the differences between these two systems. The rise in prices for both energy carriers continues. But one thing is clear – the increase in gas prices will be more significant than for electricity. This is confirmed by forecasts published by the Ministry of Housing and Communal Services for 2007-2032. It is also obvious that the increase in prices for central heating services, respectively, will be even more significant, while the payment for the operation of the autonomous gas heating system and the UDEN-S electric heating system is almost the same today.

Take an average two-room apartment of 50 sq.m. Let’s compare the cost spent on the installation of the gas system and UDEN-S electric heating, as well as the costs of operating these two systems.

Thus, you installed UDEN-S electric heating for 900 €, while saving (compared to gas) 900 €. Taking into account that for 6 months of the heating season the payment for electric heating is 900 €, the money saved on the installation of a heating system will allow you to pay for electric heating of the premises almost all year round (900 € : 900 €). And this is at the current tariffs for gas and electricity.

As you can see, the myth of insanely profitable gas heating fades somewhat in the light of real calculations.

A weighty argument in favor of electric heating is also the issue of safety, comfort and environmental friendliness. Heating beam systems based on warm panels not only successfully solve the problem of cold walls and damp corners, but also do not overdry the air, creating more comfortable conditions compared to any convection heating system (including gas), easy to operate and reliable.

From a security point of view, this is, of course, possible. The UDEN-S heating system is fully automated and absolutely safe. It does not require supervision, and due to the absence of coolant, the possibility of its leakage or freezing during a power outage is excluded. After the restoration of power supply, the heaters continue to work independently in the specified mode.

However, we do not recommend turning off the heating system completely. As you remember, the basic principle of operation of UDEN-S heaters is tempering (heating surfaces). Each season, the first 7-10 days of operation, the heating system heats and, if necessary, dries the structures of your room, and then simply maintains their stable temperature.

To achieve maximum savings and comfort, do not let the walls cool down further, because reheating is an additional energy cost. The most economical mode of operation of the UDEN-S heating system is to constantly maintain the set temperature. The optimum temperature is 20°C. An increase or decrease in temperature by 1°C leads to an increase or decrease in electricity consumption by 5-7%.

In order not to turn off the heating system in your absence, simply set the control system to a slightly lower temperature (for example, 15°C).

The calculation of the power of any heating system is based on determining the heat loss of your room. Each UDEN-S heater has its own power and is capable of heating a room of a certain volume. The technical characteristics of each model are in the table of characteristics for each product.

It should be borne in mind that heat loss, for example, an apartment and a private house are somewhat different. For example, for an average room with an area of 12-15 m² and a height of 2.5 m, 0.5-0.7 kW of UDEN-S heater power will be enough, while for a private house with insufficient thermal insulation 0.9 kW may not be enough.

To obtain accurate data, it is desirable that measurements be carried out by a specialist. Another option is to prepare an estimate based on the floor plan and questionnaire, which can be sent to us by e-mail (see the “Contacts” page).